保养维修服务中心您的雷达腕表

Maintain and repair your watch

点击查询

雷达表维修

What's the matter with Rado's watch?

时间:2022-03-09

作者:北京雷达保养

       What's the matter with Rado's watch? Beijing Rado maintenance service center provides free tips for major watch users at any time. A watch is a precision instrument used to indicate time. The principle of a watch is to use a vibration system with constant period and continuous vibration as the standard. However, the system will also fail. What to do when the Rado watch stops? Let's take you to Beijing Rado after-sales service center to find a way!

Rado watch stopped: cause analysis

       北京雷达官方售后维修中心表示,Hand on chain and automatic on Chain Watch. Manual watch on the chain is powered by hand, if the watch suddenly stopped, you have to consider the lack of power.

Beijing Rado maintenance service center

Rado's power is low. Stop: solution

       The watch should be wound at the same time every day as far as possible, so that the watch can operate with enough energy in the next 24 hours. The principle of Automatic Chain Watch is to rely on the function of the automatic winding mechanism which can tighten the spring when the watch rotates in any direction. Generally, a fully automatic watch should be worn on the hand for more than 8 hours every day to make up for the amount of winding, but it is not absolute. So if you don't wear it for a long time, or if you don't exercise enough after wearing it, it will also cause the mechanical watch not to go. In this case, it can be solved by manual winding. It is worth noting that for an automatic winding watch that has not been worn for more than 40 hours, the crown should be rotated 20 turns to start the drive system of the movement again when it is worn again.

Rado watch stopped by magnetism: solution

       The watch is magnetized, which causes the parts in the watch to be magnetized. Just go to the regular Beijing Rado after-sales service center to demagnetize the watch. The battery in the watch is dead. If this happens, don't repair it. Just replace the watch with a new battery. Let the professional technician use the watch fault instrument detector to see where your circuit board is broken, and then let the watch repairer repair it for you.

       What's the matter with Rado's watch? There are many reasons for the watch to stop. If it is not maintained for a long time and the grease is dry, it will also cause the watch to stop. If the Rado watch is hit by a fall, the movement parts will be damaged, and the watch will also stop. So remind watch friends, if your love watch appears stop and go phenomenon, welcome to consult Beijing Rado maintenance center, there will be professional technicians to provide you with the best quality service!

本文链接:http://www.beijing-rado.cn /rado_repair/434.html

上一篇:雷达手表维修一次要多少钱?
下一篇:雷达手表进水怎么处理水汽?

相关推荐

版权所有:北京雷达维修服务中心 Copyright © 2018-2032 | XML
维修服务电话:400-061-9500
Rado雷达手表维修服务中心地址在北京市东城区王府井东方广场W3座

腕表服务线上预约

China

关闭
选择预约到店时间:
备注信息(非必填):
400-061-9500
客服在线时间:7:00-22:00
温馨提示:为节省您的时间,建议尽早预约可免排队,非在线时间的预约将在客服上线后联系您
当前页面永久关闭